Scientific Solutions ® Inc.

LabPac® Laboratory Enhancements


Labpac Reagent Grade 99% IsoPropyl Alcohol (IPA)

IPA Bottle
Picture shows a 1 US gallon (3.8 L) of LabPac Brand IsoPropyl Alcohol

Description

Use with Ionic Contamination Systems

The OmegaMeter Ionic Contamination system uses a wash solution of 75% by volume of ACS reagent grade isopropyl alcohol (IPA) and 25% by volume of distilled water.

This "wash" solution is also referred to as the "test solution" or "extract solution" as its purpose is to wash off, or extract contaminates from a circuit board.

When you initally fill the OmegaMeter, you need to fill it with the correct ration of IPA to H20. You can either do this by filling with the pre-mixed solution, or by adding 99% pure IPA and distilled water in the correct ratio and mixing as it is poured into the unit.

The solution concentration (Alcohol/Water Ratio) may eventually change due to evaporation and the level may drop due to drag on the tested assemblies. You will need 99% IPA and pure distilled water to bring the ratio back into compliance.

The IPA 99% is used to maintain 75%IPA,25%D-H2O ratio in the Solvent Extract. The Solvent Extract is made from 99% pure IsoPropyl Alcohol (IPA, CAS Number 67-63-0). The IPA is mixed with distilled water at a ratio of 75% IPA to 25% D-H2O.

99% IPA, 2-Proganol Regeant Grade
(2-Hydroxy propane Dimethyl carbinol Isopropanol Isopropyl alcohol IPA)
Amount in bottle 3.8 L (1 US gallon)
Concentration 99%
Formula C3H80
MW M.W.30.1 g/mol
Boiling Pt 82 deg C (1013 hPa)
Melting Pt -89 deg C
Density 0.786 g/cm3 (20 deg C)
CAS Number 67-63-0
Index 603-117-00-0
EINECS 200-661-7
UN 1219
ADR 3,II