Scientific Solutions ® Inc.

10 Position Screw Terminal

Screw Terminal ST10

Scientific Solutions 10 Position Screw Terminal

To interface equipment using a 10 position pin header connector to discrete signals, Scientific Solutions has the 10 Position Screw Terminal.

The compact 10-position unit (3" x 5" x 2-1/2") has a double rack of clamp style screw terminals for easy attachment of discrete wires. There is a screw associated with each clamp location. You loosen the screw, insert the wire, and then tighten the screw to make a good connection between the discrete wire and the clamp

The unit also contains a 10 pin header, consisting of two rows of 5 pins at 1/10" spacing between pins. This is a shrouded connector and keyed. A 10 conductor flat ribbon cable is normally connected between the Screw Terminal Unit's 10 pin header and a likewise 10 pin header on the other equipment

A 10 conductor, 6 foot (1.8m) flat ribbon cable terminated with 10 position socket headers on each end is also provided with the Screw Terminal Unit.

10 conductor ribbon cable

Scientific Solutions 10 conductor Flat Ribbon Cable