Scientific Solutions ® Inc.
BaseBoard ® / ISA
Scientific Solutions BaseBoard / ISA card
The BaseBoard is a full size ISA card that
provides flexible, programmable digital input/output for
the ISA computer. The card features four 40 position pin header connectors that provide
96 Digital I/O connections. The header connectors accept ribbon
cables for direct connection to external equipment, or to screw
terminals. A unique bracket design allows all the cables to exit from the single slot
while providing strain-relief. A family of optional Modules can be installed directly on the
BaseBoard / ISA to enhance its capabilities by providing up to 5000v of optical isolation;
over-voltage protection; the ability to monitor / control high-voltage signals;
Analog-to-Digital Conversion and Digital-to-Analog Conversion
Information about the BaseBoard is provided on this page. Also included is information
on BaseBoard accessories including optional add-on modules, screw terminals, cables, and solid state relays
BaseBoard / ISA customers should take a look at our BaseBoard / PCI product that can run your current software without any modification required!
BaseBoard / ISA Product
BaseBoard / ISA
| Image |
 |
| Part Number |
020025 |
| Title |
BaseBoard / ISA |
| Overview |
BaseBoard / ISA is a single ISA card for the computer that provides 96 Digital I/O signals
The BaseBoard provides flexible, programmable digital input/output for the ISA computer.
96 lines of TTL compatible I/O are distributed on four 40 pin header connectors across
one full size PC board. Optional plug in modules can extend the features of the card
by adding opto-isolation to the Digital I/O while providing both over-voltage
protection and increased buffer/driver capabilities; adding Analog-to-Digital capabilities; and
by adding Digital-to-Analog capabilities.
|
| Features |
- Full size ISA Interface
- Provides 96 Digital I/O lines
- 40 pin signal header connections use cost effective ribbon cables
- Only a single ISA slot, all cables exit thru a unique bracket assembly
- Optional feature enhancing Modules Available
- Easy to install, snap right on to the card!
- Provide over-voltage protection and hihger voltage/current capability
- Extends Digital I/O from TTL +5 volts to 300 volts
- 100% register level compatible with original 1981 BaseBoard
- Runs your existing BaseBoard software with no modifications required!
|
| Product Includes |
BaseBoard ISA circuit assembly, CDROM with driver and LabPac Library, Printed User's Guide |
| Manual |
BaseBoard User's Guide (PDF) that comes with the card |
| Datasheet |
BaseBoard Datasheet(PDF) |
| Product Specifications |
Full Description and Specifications |
| Software |
Win32 Device Drivers with LabPac32 function library |
| Add to Cart |
BaseBoard / ISA Software
LabPac for Windows
| Image |
 |
| Part Number |
821012 |
| Title |
LabPac Kit-32 for Windows |
| Overview |
LabPac Kit for Windows is a full featured function library that is the Application Programming Interface (API) for all of the Scientific Solutions data acquisition products. The LabPac32 library works with the Scientific Solutions 32-bit, Ring-0, Kernel-Mode Device Drivers to provide a fast, efficient and optimized software program environment.
Simple to use functions handle event counting, precision timing, analog input, analog output, digital input and digital output. LabPac32 is implemented as a standard Dynamic Link Library (DLL) for open compatibility with programming languages and environments.
|
| Features |
- Software Development toolkit for creating your own applications
- Comes complete with Device Drivers for Scientific Solutions Products
- WDM Driver supports Win98, Win2K, WinXP, Vista32
- LabPac32 DLL as the Application Programming Interface (API)
- Software Developer Example Programs
- Compiled EXE programs
- Source Code
- Header files
- LabPac API
- Full Featured Function Dynamic Link Library
- Develop general or specialized Data Acquisition and Control applications
- Optimized for speed and flexibility
- Communicates directly with the 32-bit, Ring-0, Kernel-Mode Device Driver
- Multi-language support
- Examples are C, C++, C#, DotNet, Fortran, Pascal, VisualBasic, Java, LabView, etc.
- Timed interval processes
- Trigger functions on external events
- Supports hardware interrupts, DMA and BusMastering
|
| Product Includes |
LabPac32 for Windows software |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
LabPac32 for Windows Device Drivers and function library |
| Add to Cart |
LabPac for DOS
| Image |
 |
| Part Number |
811898 |
| Title |
LabPac for DOS |
| Overview |
LabPac for DOS is a sophisticated memory resident driver. It provides DOS applications with a complete data acquisition library that includes functions to handle event counting, precision timing, analog input, analog output, digital input and digital output. LabPac installs as a BIOS-level software interrupt, allowing any language that runs under DOS access to its various functions. Introduced in 1981 for the PC, it is available to support our long-time customers who continue to use DOS based products.
|
| Features |
- DOS Installable Device Driver and Function Library
- Device Drivers to virtualize physical hardware
- Library provides wealth of easy-to-use functions
- Optimized for speed and flexibility
- Continued support for numerous Scientific Solutions Products:
- BaseBoard (ISA and PCI)
- DADIO
- LabTender
- LabMaster DMA
- LabMaster DPCI
- BIOS-Level Memory Resident Driver with Multi-Language support
- Callable from any DOS programming language
- Timed Interval processes
- Data files in binary or ASCII format
- World's first Data Acqusition programming environment for the pc
|
| Product Includes |
LabPac for DOS software |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
LabPac for DOS Device Driver and function library |
| Add to Cart |
BaseBoard / ISA Accessories - Plug In Modules
Optical Isolation Input Module
| Image |
 |
| Part Number |
020027 |
| Title |
Opto IN Module |
| Overview |
Opto IN Module installs directly on the BaseBoard and provides optical isolation, over-voltage
protection, increased voltage handling, and increased electrical current sinking. The module incorporates
Scientific Solutions PowerTag technology that allows software to automatically identify and configure the module.
|
| Features |
- Installs directly onto the BaseBoard
- 40 position socket header plugs directly on the BaseBoard
- 50 position pin header provides isolated signals
- Optical Isolation for 24 Digital Inputs per module
- Provides 2500v Optical Isolation
- Allows input monitoring of voltage signals greater than TTL 5 volts
- Small compact and cost-effective
|
| Product Includes |
Opto IN Module |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Win32 Device Drivers with LabPac32 function library |
| FAQ |
None |
| Add to Cart |
Optical Isolation Output Module
| Image |
 |
| Part Number |
020026 |
| Title |
Opto OUT Module |
| Overview |
Opto OUT Module installs directly on the BaseBoard and provides optical isolation, over-voltage
protection, increased voltage handling, and increased electrical current sinking. The module incorporates
Scientific Solutions PowerTag technology that allows software to automatically identify and configure the module.
|
| Features |
- Installs directly onto the BaseBoard
- 40 position socket header plugs directly on the BaseBoard
- 50 position pin header provides isolated signals
- Optical Isolation for 24 Digital Outputs per module
- Provides 5000v Optical Isolation
- Allows output control of voltage signals up to 300 volts
- Small compact and cost-effective
|
| Product Includes |
Opto OUT Module |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Win32 Device Drivers with LabPac32 function library |
| FAQ |
None |
| Add to Cart |
HandShake Polarity Select Module
| Image |
 |
| Part Number |
020039 |
| Title |
HandShake Polarity Select Module |
| Overview |
HandShake Polarity Select Module installs directly on the BaseBoard and provides complete control over the
handshake signals used to clock data In or Out. When installed on a BaseBoard port that is operating in mode 1 or mode 2,
this module allows you to select Invert or Non-Invert for the polarity of BaseBoard lines used for handshaking.
The Module also allows logical 'AND' 'OR' of the various handshake signals. The module incorporates
Scientific Solutions PowerTag technology that allows software to automatically identify and configure the module.
|
| Features |
- Installs directly onto the BaseBoard
- 40 position socket header plugs directly on the BaseBoard
- 40 position pin header provides digital I/O signals
- Easy to configure polarity of control signals STB, ACK
- Easy to configure polarity of status signals IBF, OBF
- Easy to logically combine Port-A and Port-B handshake signals
- logically create a 16-bit port
- Use a single IBF / OBF for Port A 'AND'/'OR' Port B
- Use a single STB / ACK for Port A 'AND'/'OR' Port B
- Small compact and cost-effective
|
| Product Includes |
HS Polarity Module |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Win32 Device Drivers with LabPac32 function library |
| FAQ |
None |
| Add to Cart |
BaseBoard / ISA Accessories - Screw Terminals and Cables
Screw Terminal, 40 Position
| Image |
 |
| Part Number |
811973 |
| Title |
Screw Terminal, 40 Position |
| Overview |
Convenient compact double row clamp style screw terminals makes it easy to connect discrete wires
to signals located on 40 pin header connectors. Includes ribbon cable to connect the Screw Terminal Unit
to the header connection of your other equipment.
|
| Features |
- Provides Convenient Screw Terminals
- For connection to 40 pin headers
- Includes 40 conductor flat ribbon cable
- 6 ft. (1.8m) length
- Each end terminated with 40 position socket header
|
| Product Includes |
40 position Screw Terminal, 6ft length 40 conductor flat ribbon cable |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
Screw Terminal, 50 Position
| Image |
 |
| Part Number |
811974 |
| Title |
Screw Terminal, 50 Position |
| Overview |
Convenient compact double row clamp style screw terminals makes it easy to connect discrete wires
to signals located on 50 pin header connectors. Includes ribbon cable to connect the Screw Terminal Unit
to the header connection of your other equipment.
|
| Features |
- Provides Convenient Screw Terminals
- For connection to 50 pin headers
- Includes 50 conductor flat ribbon cable
- 6 ft. (1.8m) length
- Each end terminated with 50 position socket header
|
| Product Includes |
50 position Screw Terminal, 6ft length 50 conductor flat ribbon cable |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
Cable, 50 conductor ribbon, 6 ft (1.8m)
| Image |
 |
| Part Number |
943265 |
| Title |
Cable, 50 conductor ribbon, 6ft (1.8m) |
| Overview |
50 conductor flat ribbon cable, 6 foot in length (1.8 meter) and terminated on each end with a 50 position
header socket connector.
|
| Features |
- High quality ribbon cable
- 50 conductors
- Colored stripe to indicate pin 1 location
- 6 foot length (1.8 meter)
- Terminated each end with a 50 position header socket connector
|
| Product Includes |
50 conductor flat ribbon cable with attached 50 position header connectors |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
Cable, 40 conductor ribbon, 6 ft (1.8m)
| Image |
 |
| Part Number |
938605 |
| Title |
Cable, 40 conductor ribbon, 6ft (1.8m) |
| Overview |
40 conductor flat ribbon cable, 6 foot in length (1.8 meter) and terminated on each end with a 40 position
header socket connector.
|
| Features |
- High quality ribbon cable
- 40 conductors
- Colored stripe to indicate pin 1 location
- 6 foot length (1.8 meter)
- Terminated each end with a 40 position header socket connector
|
| Product Includes |
40 conductor flat ribbon cable with attached 40 position header connectors |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
BaseBoard / ISA Accessories - Solid State Relays
Solid State Relay Rack, 8 Position, Standard
| Image |
 |
| Part Number |
381013 |
| Title |
Solid State Relay Rack, 8 Position for Standard size relays |
| Overview |
Relay Racks are circuit boards that have positions to allow the plugging in of the
Solid State Relay (SSR) Modules. The Relay Racks have a connector to cable between
the rack and the digital I/O signals. The Relay Racks also have screw terminal connections
to connect to your DC voltage and AC voltage signals. Note that some Relay Racks are
made for "Standard" size SSR Modules, while other Relay Racks are made for "Mini" size
SSR Modules. Make sure you select the correct Relay Rack for the Module size you use.
|
| Features |
- SSR Module Positions: 8
- Module Size Supported: Standard
- Rack Size: 8" x 3.5" (203mm x 89mm)
|
| Product Includes |
One Relay Rack |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
Solid State Relay Rack, 24 Position, Standard
| Image |
 |
| Part Number |
381014 |
| Title |
Solid State Relay Rack, 24 Position for Standard size relays |
| Overview |
Relay Racks are circuit boards that have positions to allow the plugging in of the
Solid State Relay (SSR) Modules. The Relay Racks have a connector to cable between
the rack and the digital I/O signals. The Relay Racks also have screw terminal connections
to connect to your DC voltage and AC voltage signals. Note that some Relay Racks are
made for "Standard" size SSR Modules, while other Relay Racks are made for "Mini" size
SSR Modules. Make sure you select the correct Relay Rack for the Module size you use.
|
| Features |
- SSR Module Positions: 24
- Module Size Supported: Standard
- Rack Size: 18.75" x 4.5" (476.3mm x 114.3mm)
|
| Product Includes |
One Relay Rack |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
Solid State Relay Rack, 24 Position, Mini
| Image |
 |
| Part Number |
381015 |
| Title |
Solid State Relay Rack, 24 Position for Mini size relays |
| Overview |
Relay Racks are circuit boards that have positions to allow the plugging in of the
Solid State Relay (SSR) Modules. The Relay Racks have a connector to cable between
the rack and the digital I/O signals. The Relay Racks also have screw terminal connections
to connect to your DC voltage and AC voltage signals. Note that some Relay Racks are
made for "Standard" size SSR Modules, while other Relay Racks are made for "Mini" size
SSR Modules. Make sure you select the correct Relay Rack for the Module size you use.
|
| Features |
- SSR Module Positions: 24
- Module Size Supported: Mini
- Rack Size: 8" x 6" (203.2mm x 152.4mm)
|
| Product Includes |
One Relay Rack |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, DC Output, 60v DC, Standard Size
| Image |
 |
| Part Number |
381006 |
| Title |
Solid State Relay, DC Output, 60v DC, Standard Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- DC Output
- Load voltage: 3 to 60v DC
- Module Size: Standard
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, DC Output, 60v DC, Mini Size
| Image |
 |
| Part Number |
381010 |
| Title |
Solid State Relay, DC Output, 60v DC, Mini Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- DC Output
- Load voltage: 3 to 60v DC
- Module Size: Mini
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, DC Output, 200v DC, Standard Size
| Image |
|
| Part Number |
381017 |
| Title |
Solid State Relay, DC Output, 200v DC, Standard Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- DC Output
- Load voltage: 4 to 200v DC
- Module Size: Standard
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, DC Output, 200v DC, Mini Size
| Image |
 |
| Part Number |
381021 |
| Title |
Solid State Relay, DC Output, 200v DC, Mini Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- DC Output
- Load voltage: 4 to 200v DC
- Module Size: Mini
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, AC Output, 120v AC, Standard Size
| Image |
 |
| Part Number |
381005 |
| Title |
Solid State Relay, AC Output, 120v AC, Standard Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- AC Output
- Load voltage: 24 to 140v AC
- Module Size: Standard
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, AC Output, 120v AC, Mini Size
| Image |
 |
| Part Number |
381009 |
| Title |
Solid State Relay, AC Output, 120v AC, Mini Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- AC Output
- Load voltage: 24 to 140v DC
- Module Size: Mini
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, AC Output, 240v DC, Standard Size
| Image |
 |
| Part Number |
381016 |
| Title |
Solid State Relay, AC Output, 240v AC, Standard Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- AC Output
- Load voltage: 24 to 280v AC
- Module Size: Standard
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, AC Output, 240v AC, Mini Size
| Image |
 |
| Part Number |
381020 |
| Title |
Solid State Relay, AC Output, 240v AC, Mini Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- AC Output
- Load voltage: 24 to 280v AC
- Module Size: Mini
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, DC Input, 32v DC, Standard Size
| Image |
 |
| Part Number |
381008 |
| Title |
Solid State Relay, DC Input, 32v DC, Standard Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- DC Input
- Load voltage: 3 to 32v DC
- Module Size: Standard
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, DC Input, 32v DC, Mini Size
| Image |
 |
| Part Number |
381012 |
| Title |
Solid State Relay, DC Input, 32v DC, Mini Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- DC Input
- Load voltage: 3 to 32v DC
- Module Size: Mini
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, DC Input, 60v DC, Standard Size
| Image |
 |
| Part Number |
381019 |
| Title |
Solid State Relay, DC Input, 60v DC, Standard Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- DC Input
- Load voltage: 35 to 60v DC
- Module Size: Standard
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, DC Input, 60v DC, Mini Size
| Image |
 |
| Part Number |
381023 |
| Title |
Solid State Relay, DC Input, 60v DC, Mini Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- DC Input
- Load voltage: 35 to 60v DC
- Module Size: Mini
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, AC Input, 120v AC, Standard Size
| Image |
 |
| Part Number |
381007 |
| Title |
Solid State Relay, AC Input, 120v AC, Standard Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- AC Input
- Load voltage: 90 to 140v AC
- Module Size: Standard
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, AC Iutput, 120v AC, Mini Size
| Image |
 |
| Part Number |
381011 |
| Title |
Solid State Relay, AC Input, 120v AC, Mini Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- AC Input
- Load voltage: 90 to 140v AC
- Module Size: Mini
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, AC Input, 240v AC, Standard Size
| Image |
 |
| Part Number |
381018 |
| Title |
Solid State Relay, AC Input, 240v AC, Standard Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- AC Input
- Load voltage: 180 to 280 AC
- Module Size: Standard
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
SSR, AC Input, 240v AC, Mini Size
| Image |
 |
| Part Number |
381022 |
| Title |
Solid State Relay, AC Input, 240v AC, Mini Size |
| Overview |
Digital I/O signals from the computer are typically TTL type of signals. This means that they
are 5v logic and can typically source/sink current in the 15 to 64ma range.
If you need to control or sense higher voltage signals (example 60v DC or 120v/240v AC)
and/or higher current signals (example 3 Amps instead of 64ma), then a solution could be
to use Solid-State-Relays (SSR).
|
| Features |
- AC Input
- Load voltage: 180 to 280v DC
- Module Size: Mini
|
| Product Includes |
One Solid State Relay |
| Manual |
Not Available |
| Datasheet |
Not Available |
| Product Specifications |
Full Description and Specifications |
| Software |
Not Applicable |
| FAQ |
None |
| Add to Cart |
Specifications subject to change without notice.
Scientific Solutions liability, trademarks, and export notices apply.
Copyright © 1972-2021 Scientific Solutions - All rights reserved.
